Fiber Optic Harnesses

The Ezefix termination system makes it quick and simple to terminate PMMA optical fiber for lighting applications without the use of specialist equipment.

The system consists of a range of port connectors for connection of the fiber to a illuminator and ferrule connectors to finish end lit fiber and allow attachment of end fittings.

While factory termination is always recommended for PMMA fiber and is necessary for glass fiber, this connector system will give adequate results where maximum light output or evenness are not required.

User Guide

Ezefix Common Ends

Choose the correct part

Use this tool to find the correct part number, based on the fiber type and size.
Choose fiber type, fiber size and the number of tails using the drop down menus. Ths correct part number for your application will then be displayed.
Fiber Type Fiber Size No. of Tails

Required part number is:


Part Numbers for Available Gland Sizes

Aperture Size M25 Gland M32 Gland M40 Gland M50 Gland
6.00mm (0.24") 0600M25 0600M32 - -
8.50mm (0.33") 0850M25 0850M32 0850M40 -
10.25mm (0.40") 1025M25 1025M32 1025M40 -
11.75mm (0.46") 1175M25 1175M32 1175M40 -
13.25mm (0.52") 1325M25 1325M32 1325M40 1325M50
14.50mm (0.57") - 1450M32 1450M40 1450M50
15.50mm (0.61") - 1550M32 1550M40 1550M50
16.50mm (0.65") - 1650M32 1650M40 1650M50
17.50mm (0.69") - 1750M32 1750M40 1750M50
18.50mm (0.73") - 1850M32 1850M40 1850M50

Ezefix Ferrules

Fiber Thread Brass Part No. Stainless Steel Part No.
12 x 0.75mm M8 M8B12 M8S12
25 x 0.75mm M8 M8B25 M8S25
50 x 0.75mm M8 M8B50 M8S50
12 x 0.75mm M10 M10B12 M10S12
25 x 0.75mm M10 M10B25 M10S25
50 x 0.75mm M10 M10B50 M10S50
75 x 0.75mm M10 M10B75 M10S75
88 x 0.75mm M10 M10B88 M10S88